Search results for " photocurrent Spectroscopy"
showing 10 items of 11 documents
Characterization of Anodic Oxides on Titanium by Photocurrent and Differential Admittance Techniques
2010
Characterization of Anodic Oxides on Magnetron Sputtered Ta-Nb Alloys by Photocurrent Spectroscopy and Differential Admittance Measurements
2010
Synergistic Use of Electrochemical Impedance Spectroscopy and Photoelectrochemical Measurements for Studying Solid State Properties of Anodic HfO2
2017
Within the past years, intense research has been carried out on HfO2 as high k material, promising candidate to replace SiO2 as gate dielectric in CMOS based devices (1), and as metal oxide for resistive random access memory (ReRAM) (2). For both technological applications compact, uniform and flat oxides are necessary, and a detailed understanding of their physical properties as a function of the fabrication conditions is strongly. Hafnia performance can be significantly influenced by carrier trapping taking place at pre-existing precursors states (induced by oxygen vacancies, interstitial ions, impurities acting as dopants), or by self-trapping in a perfect lattice, where the potential we…
Photoelectrochemical Characterization of Ta/Ta2O5/Polypyrrole Heterojunctions
2009
A photodeposition of polypyrrole on anodic tantalum oxide thin films was performed in both organic and aqueous media. Pyrrole was photo-oxidised on insulating tantalum oxide by irradiating the electrode with light of suitable energy. Tantalum/ tantalum oxide/ polypyrrole heterojunctions were then characterized by means of photocurrent spectroscopy. The comparison between the photoelectrochemical response of the heterojunctions fabricated in organic and aqueous media, shows that the solvent used for the photodeposition of polypyrrole influences the location of the inversion potential. This result can be attributed to the different structure of polypyrrole films, which strongly depends on the…
The effect of thickness on the composition of passive films on a Ti–50Zr at% alloy
2006
Abstract Anodic films were grown potentiodynamically in different electrolytes (pH = 1–14) on a Ti–50Zr at% cast alloy, obtained by fusion in a voltaic arc under argon atmosphere. The thickness of the films was varied by changing formation potential from the open circuit potential up to about 9 V; growth was followed by 30 min stabilization at the forming potential. Films having different thicknesses were characterized by photocurrent spectroscopy (PCS) and electrochemical impedance spectroscopy (EIS). Moreover, film composition was analyzed by X-ray photoelectron spectroscopy (XPS). Regardless of the anodizing conditions, passive films on the Ti–50Zr at% alloy consist of a single layer mix…
Photocurrent Spectroscopy Applied to the Characterization of Passive Films on Sputter-Deposited Ti-Zr Alloys
2008
Abstract A photoelectrochemical investigation on thin (⩽13 nm) mixed oxides grown on sputter-deposited Ti–Zr alloys of different composition by air exposure and by anodizing (formation voltage, UF = 4 V/SCE) was carried out. The experimental results showed that the optical band gap, E g opt , increases with increasing Zr content in both air formed and anodic films. Such behaviour is in agreement with the theoretical expectation based on the correlation between the band gap values of oxides and the difference of electronegativity of their constituents. The flat band potential of the mixed oxides was found to be almost independent on the Ti/Zr ratio into the film and more anodic with respect …
Physicochemical Characterization of Passive Films and Corrosion Layers by Differential Admittance and Photocurrent Spectroscopy
2009
Two different electrochemical techniques, differential admittance and photocurrent spectroscopy, for the characterization of electronic and solid state properties of passive films and corrosion layers are described and critically evaluated. In order to get information on the electronic properties of passive film and corrosion layers as well as the necessary information to locate the characteristic energy levels of the passive film/electrolyte junction like: flat band potential (Ufb), conduction band edge (EC) or valence band edge (EV), a wide use of Mott-Schottky plots is usually reported in corrosion science and passivity studies. It has been shown, in several papers, that the use of simpl…
A photoelectrochemical investigation of conversion coatings on Mg substrates
2005
Abstract The structure, morphology and composition of conversion coatings grown in stannate bath on pure Mg were studied using potential–time, polarization curves, X-ray diffraction, scanning electron microscopy and photocurrent spectroscopy. The coating is manly constituted by crystalline magnesium–tin hydroxide, whose morphology and distribution depends on the conversion bath composition and temperature. The photoelectrochemical investigation allowed to estimate the band gap value of MgSn(OH) 6 and flat band potential. A sketch of the metal/passive film/electrolyte junction formed during conversion on the metal substrate is reported to account for the overall photoelectrochemical behaviou…